Planet WNAP-7300 Manuel d'utilisateur télécharger pdf (Page 2)

– 5 – – 6 –

6. Mount the WNAP-7300 steadily to the pole by locking the

pole mounting ring tightly.

7. Successful installation.

Note

Please refer to the User’s manual in CD-ROM

for more information about how to use the

external antenna with the SMA-type connector

to the WNAP-7300.

4. Conguration

Connect the WNAP-7300 with your PC by an Ethernet cable

plugging in LAN port of PoE injector in one side and in LAN

port of PC in the other side. Power on the WNAP-7300 by

PoE from PoE injector.

1. Assign a static IP address to your PC which should be in

the same network segment with the WNAP-7300. As the

default IP address of the WNAP-7300 is 192.168.1.1,

you may choose from 192.168.1.2 to 192.168.1.254.

Then click OK.

2. Open the web browser on your PC, key in the IP address

(192.168.1.1) of the WNAP-7300 in the address bar,

and then enter.

3. Now, you will see the log-in page of the WNAP-7300.

The default username and password are both “admin”.

Enter them and then click Login.

Note

Please refer to the User’s manual in CD-ROM

for more information about how to set each

mode after successful log-in.

1 2

Pas de commentaire

Planet WNAP-7300 Manuel d'utilisateur Page 2