Planet WNAP-1260 Manuel d'utilisateur télécharger pdf (Page 106)

User’s Manual of WNAP-1260

-98-

Figure 8-41

Click Add to add a static routing rule.

Figure 8-42

Object Description

 Active:

The static routing rule can take effect only if the Active check box is

selected.

 Route Name:

Enter the name of the static route.

 Destination IP

Address:

The destination address or network that you want to access. This IP

address cannot be in the same network segment as the IP address

of the WAN or LAN interface of WNAP-1260.

 IP Subnet Mask:

This IP subnet mask together with the destination IP address identify

the target network

 Gateway IP

Address:

The IP address of the next node to which packets are sent. The

gateway IP address must be in the same network segment as the IP

address of the WAN or LAN interface of WNAP-1260.

 Metric:

The number of other routers in the user network. The value ranges

from 2 to 15. Usually, the value of 2 or 3 leads to the best

performance. If the route is direct connection, set Metric to 2

After finishing settings, click Apply to save the settings.

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 153 154

Pas de commentaire

Planet WNAP-1260 Manuel d'utilisateur Page 106