Planet WNAP-1260 Manuel d'utilisateur télécharger pdf (Page 120)

User’s Manual of WNAP-1260

-112-

DHCP refers to Dynamic Host Configuration Protocol. If Use Device as DHCP Service is selected,

WNAP-1260 automatically assigns IP addresses to comupters in the LAN. Users do not need to

configure TCP/IP protocol paramters such as the IP address, the subnet mask, the gateway, and the

DNS server information for computers connected to the router’s LAN.

Figure 9-5

Using the Router as a DHCP Server

Object Description

 Use Router as

DHCP Server:

If you select the Use Router as DHCP Server check box,

WNAP-1260 serves as a DHCP server to automatically assign IP

addresses to computers connected to it

 Starting IP

Address/Ending IP

Address:

Set the starting and ending IP addresses to specify a pool of IP

addresses to be assigned by the DHCP server. After you set

Starting IP Address/Ending IP Address, hosts in the LAN obtain

IP addresses that are in the range of the starting and ending IP

addresses

 DHCP Lease Time:

The valid time for an IP address that is automatically assigned by the

DHCP server to a host. The DHCP server does not assign the IP

address to other hosts within the specified time

Using Address Reservation

Whe

n you specify a reserved IP address for a computer in the LAN, the computer always receives the

same IP address each time it accesses the router’s DHCP server. Reserved IP addresses should be

assigned to computers or servers that require permanent IP settings.

To reserve an IP address:

Step 1 Click Add to enter the Address Reservation page.

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 153 154

Pas de commentaire

Planet WNAP-1260 Manuel d'utilisateur Page 120