Planet WNAP-1260 Manuel d'utilisateur télécharger pdf (Page 122)

User’s Manual of WNAP-1260

-114-

9.7. Wireless Settings

Click Wireless Settings and the extended navigation menu is shown as follows:

Click a submenu to perform specific parameter configurations.

9.7.1. WDS Function

Wireless distribution system (WDS) enables interconnection between APs in an IEEE 802.11

wireless network. It extends the wireless network through several APs, without connection of the wired

backbone network. Enable WDS if you want to use WDS to achieve wireless repeating or bridging.

Choose Wireless Settings > WDS Function and the WDS Function page is displayed.

Figure 9-7

Object Description

 Disable Wireless

Clients

Association:

If selected, the repeater does not transmit any signals to clients that are

connected to it. Generally, clear this check box. Generally, select this check

box

 Repeater IP

Address:

Set the repeater’s IP address different from the wireless basic station and

other repeaters to avoid IP address conflict. We suggest setting IP

addresses of the same network segment for the wireless basic station and

repeaters

 Basic Station MAC

Address:

Enter the MAC address of the wireless basic station.

After finishing settings, click Apply to save the settings.

For WDS application description, refer to section 5.2.3. “WDS Application”.

9.7.2. Wireless Basic Settings

Choose Wireless Settings > Wireless Basic Settings and the Wireless Basic Settings page is

displayed.

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 153 154

Pas de commentaire

Planet WNAP-1260 Manuel d'utilisateur Page 122